• Angio imaging with stress support ultrasound

    0.00$

    PRODUCT #RXBC-700

    Exercise Table for Ultrasound, with electrical adjustable slope (transversal, 45º) for an optimal position of the heart in echo research.

    Due to a removable part of the back support, a better view of the heart from the back side is possible. The minimum distance to the floor, the adjustable shoulder and hip support together with the adjustability of the Angio imaging ergometer provide an optimal feeling of comfort during exercise for the test subject. The research can be done in a sitting position next to the test subject. The stress support for Ultrasound can be used for other cardiologic exercise research in laying or sitting position as well. It is standard supplied with an easy transport tool to lift the device and move to the desired location.

    The Angio imaging is an ergometer that can be used for both arm and supine ergometry. Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used. The Angio operates independent of pedaling speed in the range of 7 – 1000 watt. The Angio imaging is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 7″ colour display. The ergometer is equipped with pedal shoes.

    FEATURES

    • Comfortable bed for the Patient
    • Reliable and reproducible stress tests
    • High standards

    Extreme low start up load
    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Small adjustment steps
    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    Service friendly ergometer
    Lode ergometers are very service friendly. In general, total costs for spare parts are so low that they are negligible. Furthermore, most options are so easy to install and firmware is so easy to update that labor costs are minimal. Moreover, the ergometer can be cleaned easily.

    Accurate over a long period of time
    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Compatible with ECG and pulmonary devices
    The Lode ergometers have digital interfaces and can be controlled easily by all known stress ECG and pulmonary devices available in the world. This is one of the reasons why the Lode ergometers are very popular worldwide.

    Versatile Interfacing
    Various interface protocols guarantee perfect communication with all commonly known stress ECG and spirometry equipment

    No pharmalogical stress needed
    No pharmalogical stress needed during Echo Stress Test

    Additional features with PCU
    Besides the possibility to program 24 protocols easily, this control unit offers the following features:
    – better monitoring because of the additional and larger display
    – a perfect combination with BPM
    – possibility to measure SpO2

    Add to cart
  • LODE Angio CPET – single set

    0.00$

    PRODUCT #LD

    The Angio cpet is an ergometer that can be used for both arm and supine ergometry. Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used.

    The Angio operates independent of pedaling speed in the range of 7 – 1000 watt. The Angio cpet is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 3,5″ colour display.

    FEATURES

    • Automatic stand
    • Static wall fixation
    • Electrical adjustable wall fixation

    Add to cart
  • LODE Angio CPET with Automatic Stand

    0.00$

    PRODUCT #LD

    With the stand for the Angio, the ergometer can move up and down over a range of 140cm.

    With the stand it is easier to move your arm Ergometry setting to another room, because it can stand free. For heavy use during arm-ergometry it is possible to fixate the stand to the wall with the supplied parts.  Together with the automatic stand the Angio becomes an ergometric unit that can be used for both arm and leg Ergometry (this setting is standard supplied with handcurbles). Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used. The Angio operates independent of pedaling speed in the range of 7 – 1000 watt. The Angio cpet is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 3,5″ colour display.

    FEATURES

    • Easy to connect
    • Easy to move around
    • Easy user interface

    Reliable and reproducible stress tests

    The experience of professionals who calibrate many ergometers shows that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

    High standards

    Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

    Additional features with PCU

    Besides the possibility to program 24 protocols easily, this control unit offers the following features:
    – better monitoring because of the additional and larger display
    – a perfect combination with BPM
    – possibility to measure SpO2

    Multifunctional

    The ergometer can be used for both arm and leg ergometry.

    Small adjustment steps

    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    Extreme low start-up load

    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Accurate over a long period of time

    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    LEM compatible

    This product can be used with Lode Ergometry Manager (LEM) software to manage data and to apply specific protocols when a Communication card or Network card is present.

    LCRM compatible

    This product can be used with Lode Cardiac Rehabilitation Manager software (LCRM) Custom View

    Customer specific display setting

    Display settings are adjustable according to your specific requirements: each individual has its specific wishes about the parameters to be displayed. This can easily be adjusted with the Lode ergometers.

    Versatile Interfacing

    Various interface protocols guarantee perfect communication with all commonly known stress ECG and spirometry equipment

    Add to cart
  • LODE Angio CPET with electrical adjustable wall fixation

    0.00$

    PRODUCT #-

    The wall fastening consists of a vertical rail with hang-up mechanism which makes it possible to move the Angio up and down electrically over a range of 70 cm.

    Handgrips are standard included in this combination. The Angio is an ergometric unit that can be used for both arm and supine ergometry. Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used. The Angio operates independent of pedaling speed in the range of 7 – 1000 watt. The Angio cpet is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 3,5″ colour display.

    FEATURES

    • Easy to connect
    • Easy to move around
    • Easy user interface

    High standards

    Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

    Easy to operate

    For Lode products this means:
    – easy to connect
    – easy to move around
    – easy user interface

    Reliable and reproducible stress tests

    The experience of professionals who calibrate many ergometers shows that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

    Additional features with PCU

    Besides the possibility to program 24 protocols easily, this control unit offers the following features:
    – better monitoring because of the additional and larger display
    – a perfect combination with BPM
    – possibility to measure SpO2

    Accurate over a long period of time

    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Extreme low start-up load

    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Small adjustment steps

    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    RS232 connectivity

    RS232 ports enable connectivity to most ECG and ergospirometry devices as well as PC's.

    LEM compatible

    This product can be used with Lode Ergometry Manager (LEM) software to manage data and to apply specific protocols when a Communication card or Network card is present

    LCRM compatible

    This product can be used with Lode Cardiac Rehabilitation Manager software (LCRM)

    Add to cart
  • LODE Angio CPET with Static Wall Fixation

    0.00$

    PRODUCT #LD

    In this system, the Angio is fixed to the wall. Handgrips are standard included. The Angio is an ergometric unit that can be used for both arm and supine ergometry.

    Its compact design makes it universally applicable for ergometric studies in those sectors in which standard ergometry cannot be used. The Angio operates independent of pedaling speed in the range of 7 – 1000 watt.The Angio cpet is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 3,5″ colour display.

    FEATURES

    • Easy to connect
    • Easy to move around
    • Easy user interface

    Reliable and reproducible stress tests

    The experience of professionals who calibrate many ergometers shows that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

    High standards

    Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

    Additional features with PCU

    Besides the possibility to program 24 protocols easily, this control unit offers the following features:
    – better monitoring because of the additional and larger display
    – a perfect combination with BPM
    – possibility to measure SpO2

    Extreme low start-up load

    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Accurate over a long period of time

    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Small adjustment steps

    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    RS232 connectivity

    RS232 ports enable connectivity to most ECG and ergospirometry devices as well as PC's.

    LEM compatible

    This product can be used with Lode Ergometry Manager (LEM) software to manage data and to apply specific protocols when a Communication card or Network card is present

    LCRM compatible

    This product can be used with Lode Cardiac Rehabilitation Manager software (LCRM)

    Versatile Interfacing

    Various interface protocols guarantee perfect communication with all commonly known stress ECG and spirometry equipment
    Custom View

    Customer specific display setting

    Display settings are adjustable according to your specific requirements: each individual has its specific wishes about the parameters to be displayed. This can easily be adjusted with the Lode ergometers.

    Add to cart
  • Lode Corival CPET Ergometer

    0.00$

    PRODUCT #SLP7200B

    The Corival is one of the most popular ergometers worldwide. The low start-up load of 7 Watt is first-class.

    The Corival cpet is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 3,5″ colour display. The Corival has an eddy current electro-magnetic braking mechanism. The biggest advantage of this system is the accuracy which is one of the most important Lode principles. With this ergometer, the stress tests performed are reliable and reproducible. The workload is adjustable in a range of 7 to 1000 watt. The ultralow step-through enables easy access to the ergometer and the latest design guarantees a perfect ergonomic position. Moreover, the noise level is reduced to a minimum.

    FEATURES

    • Reliable and reproducible stress tests
    • High standards
    • Various test modes
    • Q-factor equal to road-bike
    • Rotatable handlebar with new lever
    • Compatible with ECG and pulmonary devicesCompatible with ECG and pulmonary devices
    • Extreme low start up load
    • Low noise
    • Accurate over a long period of time
    • RS232 connectivity
    • Readout of saddle height
    • Perfect ergonomic position
    • Ultra-low step-through
    • Hidden connectors
    • USB connectivity

    Add to cart
  • LODE Corival Pediatric

    0.00$

    PRODUCT #LD

    The special design of the Corival Pediatric guarantees easy access and ergometry testing of children.

    The ergometer is standard supplied with a communication module and can therefor be easily controlled by all known stress ECG and pulmonary devices in the world. The workload, rpm and time can be readout from the 7″ colour display. The Corival has an eddy current electro-magnetic braking mechanism. The biggest advantage of this system is the accuracy which is one of the most important Lode principles. With this ergometer, the stress tests performed are reliable and reproducible. The workload is adjustable in a range of 7 to 1000 watt.

    A USB A-B cable for service purposes as well as connecting to ECG and pulmonary testing devices will be standard delivered with the product.To connect older ECG and pulmonary testing devices with RS232 or other connectors you need a special interface cable that can be ordered separately.

    FEATURES

    • Reliable and reproducible stress tests
    • High standards
    • Rotatable handlebar

    Reliable and reproducible stress tests

    The experience of professionals who calibrate many ergometers showed that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

    High standards

    Lode is a socially and environmentally responsible company. All Lode products are RoHS/WEE compliant and Lode is ISO 9001:2015, and ISO 13485:2016 certified. All medical products comply to MDD 93/42/EEC, incl. IEC 60601-1.

    Rotatable handlebar

    The handlebar can be rotated 360 degrees and is constructed in such a way that the test subject can sit comfortably at every seating height. This design makes a height-adjustable handlebar redundant.

    Various test modes

    Besides the hyperbolic (rpm-independent) mode that is used most of the time, the standard control unit offers several other test modes, like the fixed torque mode and the linear mode.These modes can be used in both manual and terminal mode.

    Multifunctional

    The ergometer can be used in various ergometry settings, enabling a multifunctional deployment.

    Child friendly design

    The special design of this ergometer makes it easy accessible and approachable for children.

    Compatible with ECG and pulmonary devices

    The Lode ergometers have digital interfaces and can be controlled easily by all known stress ECG and pulmonary devices available in the world. This is one of the reasons why the Lode ergometers are very popular worldwide.

    Extreme low start up load

    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Low noise

    Due to accurate manufacturing and the careful choice of materials the product has an extremely low noise level.

    Accurate over a long period of time

    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Small adjustment steps

    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    Service friendly ergometer

    Lode ergometers are very service friendly. In general, total costs for spare parts are so low that they are negligible. Furthermore, most options are so easy to install and firmware is so easy to update that labor costs are minimal. Moreover, the ergometer can be cleaned easily.

    Add to cart
  • Lode Corival Recumbent CPET Ergometer

    0.00$

    PRODUCT #LD929900

    The latest design of the Corival Recumbent ergometer offers ergometry testing for test subjects up to 300 kg! Easy positioning and access is guaranteed by the electric adjustable seat and adjustable handgrips next to the seat.

    Moreover, the back support can be adjusted. For safety reasons, the back support can be positioned flat in CPR position in 1 step. This ergometer can be used for elderly and obese people and in rehabilitation settings.

    The Corival Recumbent is a special product from our Corival range. The Corival is one of the most popular ergometers worldwide. The low start-up load of 7 Watt is unique. The Corival can be controlled easily by all known stress ECG and pulmonary devices in the world. The ergometer has an eddy current electro-magnetic braking mechanism. The biggest advantage of this system is the accuracy which is one of the most important Lode principles. With this ergometer, the stress tests performed are reliable and reproducible. The workload is adjustable in a range of 7 to 1000 watt. Moreover, the noise level is reduced to a minimum.

    FEATURES

    • Reliable and reproducible stress tests
    • Adjustable back support with flat CPR position
    • Maximum patient weight 300 kg

    Reliable and reproducible stress tests
    The experience of professionals who calibrate many ergometers showed that the Lode ergometers are the most reliable across the complete workload and rpm range and still within specifications even after many years of intensive use.

    Adjustable back support with flat CPR position
    The back support can be adjusted in order to guarantee the most comfort position for each individual test subject. In case of emergency, the back support can be adjusted to a flat CPR position in 1 action.

    Maximum patient weight 300 kg
    Patients of up to 300 kg body weight can be tested on this ergometer.

    Electric adjustable seat positioning
    The seat of the ergometer can be adjusted electrically.

    Suitable for all body postures
    This ergometer is designed to offer comfort ergometry testing for test subject of all body postures.

    Extreme low start up load
    The extreme low start-up load of 7 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Accurate over a long period of time
    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Small adjustment steps
    The workload of the Lode ergometers is adjustable in steps of only 1 watt. Depending on your wishes, the test operator or the test subject can adjust the workload. The steps of 1 watt are possible in the manual mode as well as within protocols.

    Compatible with ECG and pulmonary devices
    The Lode ergometers have digital interfaces and can be controlled easily by all known stress ECG and pulmonary devices available in the world. This is one of the reasons why the Lode ergometers are very popular worldwide.

    Easy step-through
    The ergometer has a comfortable step-through: a must for people who are not so mobile!

    Add to cart
  • Lode Excalibur Sports ergometer

    0.00$

    PRODUCT #SLP7200B

    With its unbeatable accuracy and reliability, the Excalibur Sport has proven itself as The Gold Standard in Ergometry ever since 1985.

    However, the world keeps spinning and developments never stop. That is why we now proudly present the new Lode Excalibur Sport: Smarter, Better and Stronger! Still true to its heritage but combined with innovative new features to meet the latest and future requirements of modern sports medicine and research to allow athletes to become stronger and better with smarter use of human performance technology.

    Versatile ergometer
    The new Lode Excalibur Sport ergometer is an essential part of a sports medicine or research lab, since it can be used to test all types of athletes. The ergometer allows for various tests, like a Wingate sprint test, Isokinetic tests, High Intensity Tests (HIT) and time trials. Moreover, it can also be used for CPET testing and bike fitting.

    This ergometer is standard supplied with a 7″ control unit and a USB A-B cable to connect to cpet devices.

    FEATURES

    Suitable for all types of athletes
    The ergometer can be used for various tests, like e.g. Wingate, Isokinetic, HIT and timetrials. Moreover CPET testing and bike fitting is possible, allowing all types of athletes to be tested.

    Extreme workload range of 10 – 3000 watt

    This extraordinary peak workload is extremely suitable for sports medicine and testing the strongest athletes on their anaerobic power or isokinetic capacity. Combined with the low start workload of 10 Watt this Excalibur will fit everybody.

    Suitable for all types of athletes

    The ergometer can be used for various tests, like e.g. Wingate, Isokinetic, HIT and timetrials. Moreover CPET testing and bike fitting is possible, allowing all types of athletes to be tested.

    Extreme adjustability

    Both the saddle and the handlebar can be adjusted horizontally and vertically using the control unit.

    Exchangeable accessories

    The pedals, handlebar and saddle can easily be exchanged for the Test Subjects own accessories to test the Test Subject as realistic as possible, to optimize the circumstances or exchange to test a better bike fitting.

    Heavy Duty Design

    The Excalibur Sport is designed for heavy duty sports medicine ergometry, without doing any concession on the esthetic, modern and robust design. In other words: Excalibur Sport: the gold standard in Ergometry!

    Electric adjustable saddle Excalibur Sport

    The position of the saddle of the excalibur sport can be adjusted in height, length and angle to suit all users.

    The saddle of the ergometer can be adjusted horizontally in a range of 252 mm and the saddle height in a range of 388 mm using the Control Unit or LEM.

    The Test Subject can be seated on the saddle while adjusting.

    Electric adjustable handlebar Excalibur Sport

    The position of the handlebar of Excalibur Sport is completely adjustable in height and length.

    The handlebar of the ergometer can be adjusted horizontally in a range of 169mm and vertically in a range of 390mm using the Control Unit or LEM software. The Test Subject can use the handlebar while adjusting.

    Extreme low start up load 10W

    The extreme low start-up load of 10 watts and the adjustability in small steps of 1 watt make this ergometer perfectly suitable for many different applications. The standard control unit shows multiple ergometry parameters and you can determine your specific default setting and start-up menu.

    Low noise

    Due to accurate manufacturing and the careful choice of materials the product has an extremely low noise level.

    Accurate over a long period of time

    The Lode ergometers are supplied with an electro-magnetic braking mechanism of Lanooy (eddy current). The biggest advantage of this braking system compared to a friction braking system is the absolute accuracy and the accuracy over time. Moreover, friction braking systems have more wearing parts.

    Compatible with ECG and pulmonary devices

    The Lode ergometers have digital interfaces and can be controlled easily by all known stress ECG and pulmonary devices available in the world. This is one of the reasons why the Lode ergometers are very popular worldwide.

    Exchangeable pedals

    The cranks of the ergometer are suitable for almost all available clip systems so cyclists can perform a test with their own favorite pedals.

    Designed to be sweat-proof

    The housing of the ergometer is designed in such way that sweat does not have the chance to drip into the mechanical parts and cables are protected. This ensures a long lifetime and makes the ergometer insensitive for malfunction.

    RS232 connectivity

    RS232 ports enable connectivity to most ECG and ergospirometry devices as well as PC’s.

    LEM compatible

    This product can be used with Lode Ergometry Manager (LEM) software to manage data and to apply specific protocols when a Communication card or Network card is present

    Add to cart
  • TrackMaster TMX428 Stress Treadmil

    0.00$

    PRODUCT #PTS3028

    Displays incline, speed, time, distance, total calories, calories per minute,
    pace, heart rate, target heart rate and METS.

    Energy is calculated based on gender and user weight. Target heart rate is calculated based on user's gender and age.

    FEATURES

    Large LCD display
    Manual or Programmable Modes
    Heavy duty treadmill
    Running surface 22″ x 63″

    User capacity 500 lbs
    Zero start, 0.5-12 MPH (0.8-19 KPH)
    Elevation range 0-25%
    Self aligning with adjustable front and rear roller
    Self calibrating
    Front rail included
    Emergency Stop button (left or right side)
    Emergency Wrist Tether (opposite of stop button)
    Electrical: 220V
    In Programmable Mode: 5 pre-programmed protocols,
    five fitness workouts and five custom workouts with up to
    10 programmable stages

    Add to cart